{"title":"Decals - Patterns and Texture","description":null,"products":[{"product_id":"decals-boho-ceramic-decals-enamel-38878","title":"Boho Waterslide Decal - Ceramic, Enamel \u0026 Glass Fusing Overglaze Decal Sheet 2017","description":"\u003cp\u003eWaterslide Ceramic Decals – Perfect for Enamel, Glass \u0026amp; Ceramic Overglaze\u003cbr\u003eEnhance your artistic creations with high-quality waterslide ceramic decals! These decals feature a clear background for seamless blending and are designed to adhere beautifully to enamel, glass, and ceramic surfaces.\u003c\/p\u003e\n\u003cp\u003e⚠️ Please Note: Colors may appear different after firing compared to how they look on screen.\u003c\/p\u003e\n\u003cp\u003eWHITE BACKGROUND OPTION: The white background option is for enamel only - not suitable for glass or ceramic. It's great when your piece has a dark background.\u003c\/p\u003e\n\u003cp\u003eHow to Use Waterslide Decals\u003cbr\u003e1. Preparation\u003cbr\u003e✔️ Ensure the surface is clean and dry before application.\u003cbr\u003e✔️ Cut the decal to the desired shape, leaving a small border.\u003c\/p\u003e\n\u003cp\u003e2. Soaking in Water\u003cbr\u003e✔️ Submerge the decal in lukewarm water for 30-60 seconds until it starts sliding off the backing.\u003c\/p\u003e\n\u003cp\u003e3. Application\u003cbr\u003e✔️ Place the decal on the surface while still on the backing paper.\u003cbr\u003e✔️ Gently slide the decal onto the surface using your finger or a soft tool.\u003c\/p\u003e\n\u003cp\u003e4. Smoothing \u0026amp; Positioning\u003cbr\u003e✔️ Use a soft cloth or sponge to remove air bubbles and excess water.\u003cbr\u003e✔️ Ensure the decal is smooth and properly aligned.\u003c\/p\u003e\n\u003cp\u003e5. Drying\u003cbr\u003e✔️ Let the decal dry for several hours or follow the manufacturer’s instructions.\u003cbr\u003e✔️ Ensure the surface is completely dry before firing.\u003c\/p\u003e\n\u003cp\u003e6. Firing Instructions\u003cbr\u003eFollow the recommended firing temperature based on your surface type:\u003c\/p\u003e\n\u003cp\u003e🔹 Enamel:\u003cbr\u003e• Kiln firing – 785°C (1445°F) for 1 minute\u003cbr\u003e• Torch firing – Heat gently until the decal changes color, then continue until it fuses with the enamel background.\u003c\/p\u003e\n\u003cp\u003e🔹 Glass:\u003cbr\u003e• Heat from 20°C (68°F) to 590°C (1094°F), then increase to 640°C (1184°F) over 4 hours.\u003cbr\u003e• Hold at this temperature for 25-30 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003e🔹 Ceramic (Overglaze Decals):\u003cbr\u003e• Heat from 20°C (68°F) to 785°C (1445°F) in 60 minutes (or as quickly as the kiln allows).\u003cbr\u003e• Hold at 785°C (1445°F) for 15 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003eAvailable Sizes\u003cbr\u003e📏 5-7\/8 x 8-1\/4 in (148 x 210 mm)\u003cbr\u003e📏 8-1\/4 x 11-3\/4 in (210 x 297 mm)\u003c\/p\u003e\n\u003cp\u003e💡 Perfect for enamel artists, glassworkers, and ceramic creators! Whether you're adding intricate details or layering multiple decals, these waterslide decals offer versatility and professional-quality results.\u003c\/p\u003e\n\u003cp\u003e📦 Fast Worldwide Shipping | 📞 Expert Support for Artists\u003c\/p\u003e\n\u003cp\u003e✨ Order your ceramic decals today and take your designs to the next level! ✨\u003c\/p\u003e","brand":"My Store","offers":[{"title":"8-1\/4 x 11-3\/4 in \/ Torch","offer_id":46079535743191,"sku":"2017","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in \/ kiln","offer_id":46079535775959,"sku":"2017","price":26.6,"currency_code":"USD","in_stock":true},{"title":"5-7\/8 x 8-1\/4 in \/ Torch","offer_id":46079535808727,"sku":"2017","price":17.5,"currency_code":"USD","in_stock":true},{"title":"5-7\/8 x 8-1\/4 in \/ kiln","offer_id":46079535841495,"sku":"2017","price":17.5,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ Torch","offer_id":49647447965911,"sku":"2017","price":29.0,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ kiln","offer_id":49647447998679,"sku":"2017","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/6568\/3415\/files\/il_fullxfull.3705814379_3x4g.jpg?v=1742130188"},{"product_id":"decals-ceramic-decals-enamel-decal-10768","title":"Boho Stripes and Arches Waterslide Decal - Ceramic, Enamel \u0026 Glass Fusing Overglaze Decal Sheet 40052","description":"\u003cp\u003eWaterslide Ceramic Decals – Perfect for Enamel, Glass \u0026amp; Ceramic Overglaze\u003cbr\u003eEnhance your artistic creations with high-quality waterslide ceramic decals! These decals feature a clear background for seamless blending and are designed to adhere beautifully to enamel, glass, and ceramic surfaces.\u003c\/p\u003e\n\u003cp\u003e⚠️ Please Note: Colors may appear different after firing compared to how they look on screen.\u003c\/p\u003e\n\u003cp\u003eWHITE BACKGROUND OPTION: The white background option is for enamel only - not suitable for glass or ceramic. It's great when your piece has a dark background.\u003c\/p\u003e\n\u003cp\u003eHow to Use Waterslide Decals\u003cbr\u003e1. Preparation\u003cbr\u003e✔️ Ensure the surface is clean and dry before application.\u003cbr\u003e✔️ Cut the decal to the desired shape, leaving a small border.\u003c\/p\u003e\n\u003cp\u003e2. Soaking in Water\u003cbr\u003e✔️ Submerge the decal in lukewarm water for 30-60 seconds until it starts sliding off the backing.\u003c\/p\u003e\n\u003cp\u003e3. Application\u003cbr\u003e✔️ Place the decal on the surface while still on the backing paper.\u003cbr\u003e✔️ Gently slide the decal onto the surface using your finger or a soft tool.\u003c\/p\u003e\n\u003cp\u003e4. Smoothing \u0026amp; Positioning\u003cbr\u003e✔️ Use a soft cloth or sponge to remove air bubbles and excess water.\u003cbr\u003e✔️ Ensure the decal is smooth and properly aligned.\u003c\/p\u003e\n\u003cp\u003e5. Drying\u003cbr\u003e✔️ Let the decal dry for several hours or follow the manufacturer’s instructions.\u003cbr\u003e✔️ Ensure the surface is completely dry before firing.\u003c\/p\u003e\n\u003cp\u003e6. Firing Instructions\u003cbr\u003eFollow the recommended firing temperature based on your surface type:\u003c\/p\u003e\n\u003cp\u003e🔹 Enamel:\u003cbr\u003e• Kiln firing – 785°C (1445°F) for 1 minute\u003cbr\u003e• Torch firing – Heat gently until the decal changes color, then continue until it fuses with the enamel background.\u003c\/p\u003e\n\u003cp\u003e🔹 Glass:\u003cbr\u003e• Heat from 20°C (68°F) to 590°C (1094°F), then increase to 640°C (1184°F) over 4 hours.\u003cbr\u003e• Hold at this temperature for 25-30 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003e🔹 Ceramic (Overglaze Decals):\u003cbr\u003e• Heat from 20°C (68°F) to 785°C (1445°F) in 60 minutes (or as quickly as the kiln allows).\u003cbr\u003e• Hold at 785°C (1445°F) for 15 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003eAvailable Sizes\u003cbr\u003e📏 5-7\/8 x 8-1\/4 in (148 x 210 mm)\u003cbr\u003e📏 8-1\/4 x 11-3\/4 in (210 x 297 mm)\u003c\/p\u003e\n\u003cp\u003e💡 Perfect for enamel artists, glassworkers, and ceramic creators! Whether you're adding intricate details or layering multiple decals, these waterslide decals offer versatility and professional-quality results.\u003c\/p\u003e\n\u003cp\u003e📦 Fast Worldwide Shipping | 📞 Expert Support for Artists\u003c\/p\u003e\n\u003cp\u003e✨ Order your ceramic decals today and take your designs to the next level! ✨\u003c\/p\u003e","brand":"My Store","offers":[{"title":"8-1\/4 x 11-3\/4 in \/ kiln","offer_id":46079553667287,"sku":"40052","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in \/ torch","offer_id":46079553700055,"sku":"40052","price":26.6,"currency_code":"USD","in_stock":true},{"title":"5-7\/8 x 8-1\/4 in \/ kiln","offer_id":46079553732823,"sku":"40052","price":17.5,"currency_code":"USD","in_stock":true},{"title":"5-7\/8 x 8-1\/4 in \/ torch","offer_id":46079553765591,"sku":"40052","price":17.5,"currency_code":"USD","in_stock":true},{"title":"5-7\/8 x 8-1\/4in  top \/ kiln","offer_id":46079553798359,"sku":"40052","price":17.5,"currency_code":"USD","in_stock":true},{"title":"5-7\/8 x 8-1\/4in  top \/ torch","offer_id":46079553831127,"sku":"40052","price":17.5,"currency_code":"USD","in_stock":true},{"title":"5-7\/8*8-1\/4in bottom \/ kiln","offer_id":46079553863895,"sku":"40052","price":17.5,"currency_code":"USD","in_stock":true},{"title":"5-7\/8*8-1\/4in bottom \/ torch","offer_id":46079553896663,"sku":"40052","price":17.5,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ kiln","offer_id":49647449276631,"sku":"40052","price":29.0,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ torch","offer_id":49647449309399,"sku":"40052","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/6568\/3415\/files\/il_fullxfull.5723599993_ewrx.jpg?v=1739461828"},{"product_id":"versatile-ceramic-drop-decals-enamel-70206","title":"Versatile Waterslide Decal - Ceramic, Enamel \u0026 Glass Fusing Overglaze Decal Sheet 4121","description":"\u003cp\u003eWaterslide Ceramic Decals – Perfect for Enamel, Glass \u0026amp; Ceramic Overglaze\u003cbr\u003eEnhance your artistic creations with high-quality waterslide ceramic decals! These decals feature a clear background for seamless blending and are designed to adhere beautifully to enamel, glass, and ceramic surfaces.\u003c\/p\u003e\n\u003cp\u003e⚠️ Please Note: Colors may appear different after firing compared to how they look on screen.\u003c\/p\u003e\n\u003cp\u003eWHITE BACKGROUND OPTION: The white background option is for enamel only - not suitable for glass or ceramic. It's great when your piece has a dark background.\u003c\/p\u003e\n\u003cp\u003eHow to Use Waterslide Decals\u003cbr\u003e1. Preparation\u003cbr\u003e✔️ Ensure the surface is clean and dry before application.\u003cbr\u003e✔️ Cut the decal to the desired shape, leaving a small border.\u003c\/p\u003e\n\u003cp\u003e2. Soaking in Water\u003cbr\u003e✔️ Submerge the decal in lukewarm water for 30-60 seconds until it starts sliding off the backing.\u003c\/p\u003e\n\u003cp\u003e3. Application\u003cbr\u003e✔️ Place the decal on the surface while still on the backing paper.\u003cbr\u003e✔️ Gently slide the decal onto the surface using your finger or a soft tool.\u003c\/p\u003e\n\u003cp\u003e4. Smoothing \u0026amp; Positioning\u003cbr\u003e✔️ Use a soft cloth or sponge to remove air bubbles and excess water.\u003cbr\u003e✔️ Ensure the decal is smooth and properly aligned.\u003c\/p\u003e\n\u003cp\u003e5. Drying\u003cbr\u003e✔️ Let the decal dry for several hours or follow the manufacturer’s instructions.\u003cbr\u003e✔️ Ensure the surface is completely dry before firing.\u003c\/p\u003e\n\u003cp\u003e6. Firing Instructions\u003cbr\u003eFollow the recommended firing temperature based on your surface type:\u003c\/p\u003e\n\u003cp\u003e🔹 Enamel:\u003cbr\u003e• Kiln firing – 785°C (1445°F) for 1 minute\u003cbr\u003e• Torch firing – Heat gently until the decal changes color, then continue until it fuses with the enamel background.\u003c\/p\u003e\n\u003cp\u003e🔹 Glass:\u003cbr\u003e• Heat from 20°C (68°F) to 590°C (1094°F), then increase to 640°C (1184°F) over 4 hours.\u003cbr\u003e• Hold at this temperature for 25-30 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003e🔹 Ceramic (Overglaze Decals):\u003cbr\u003e• Heat from 20°C (68°F) to 785°C (1445°F) in 60 minutes (or as quickly as the kiln allows).\u003cbr\u003e• Hold at 785°C (1445°F) for 15 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003eAvailable Sizes\u003cbr\u003e📏 5-7\/8 x 8-1\/4 in (148 x 210 mm)\u003cbr\u003e📏 8-1\/4 x 11-3\/4 in (210 x 297 mm)\u003c\/p\u003e\n\u003cp\u003e💡 Perfect for enamel artists, glassworkers, and ceramic creators! Whether you're adding intricate details or layering multiple decals, these waterslide decals offer versatility and professional-quality results.\u003c\/p\u003e\n\u003cp\u003e📦 Fast Worldwide Shipping | 📞 Expert Support for Artists\u003c\/p\u003e\n\u003cp\u003e✨ Order your ceramic decals today and take your designs to the next level! ✨\u003c\/p\u003e","brand":"My Store","offers":[{"title":"8-1\/4 x 11-3\/4 in \/ Torch","offer_id":46079554093271,"sku":"4121","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in \/ kiln","offer_id":46079554126039,"sku":"4121","price":26.6,"currency_code":"USD","in_stock":true},{"title":"5-7\/8 x 8-1\/4 in \/ Torch","offer_id":46079554158807,"sku":"4121","price":17.5,"currency_code":"USD","in_stock":true},{"title":"5-7\/8 x 8-1\/4 in \/ kiln","offer_id":46079554191575,"sku":"4121","price":17.5,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ Torch","offer_id":49647449342167,"sku":"4121","price":29.0,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ kiln","offer_id":49647449374935,"sku":"4121","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/6568\/3415\/files\/il_fullxfull.5119147820_6uvc.jpg?v=1739461838"},{"product_id":"boho-chic-neutral-pastel-ceramic-decal-28460","title":"Boho Chic Neutral Pastel Waterslide Decal - Ceramic, Enamel \u0026 Glass Fusing Overglaze Decal Sheet 2015","description":"\u003cp\u003eWaterslide Ceramic Decals – Perfect for Enamel, Glass \u0026amp; Ceramic Overglaze\u003cbr\u003eEnhance your artistic creations with high-quality waterslide ceramic decals! These decals feature a clear background for seamless blending and are designed to adhere beautifully to enamel, glass, and ceramic surfaces.\u003c\/p\u003e\n\u003cp\u003e⚠️ Please Note: Colors may appear different after firing compared to how they look on screen.\u003c\/p\u003e\n\u003cp\u003eWHITE BACKGROUND OPTION: The white background option is for enamel only - not suitable for glass or ceramic. It's great when your piece has a dark background.\u003c\/p\u003e\n\u003cp\u003eHow to Use Waterslide Decals\u003cbr\u003e1. Preparation\u003cbr\u003e✔️ Ensure the surface is clean and dry before application.\u003cbr\u003e✔️ Cut the decal to the desired shape, leaving a small border.\u003c\/p\u003e\n\u003cp\u003e2. Soaking in Water\u003cbr\u003e✔️ Submerge the decal in lukewarm water for 30-60 seconds until it starts sliding off the backing.\u003c\/p\u003e\n\u003cp\u003e3. Application\u003cbr\u003e✔️ Place the decal on the surface while still on the backing paper.\u003cbr\u003e✔️ Gently slide the decal onto the surface using your finger or a soft tool.\u003c\/p\u003e\n\u003cp\u003e4. Smoothing \u0026amp; Positioning\u003cbr\u003e✔️ Use a soft cloth or sponge to remove air bubbles and excess water.\u003cbr\u003e✔️ Ensure the decal is smooth and properly aligned.\u003c\/p\u003e\n\u003cp\u003e5. Drying\u003cbr\u003e✔️ Let the decal dry for several hours or follow the manufacturer’s instructions.\u003cbr\u003e✔️ Ensure the surface is completely dry before firing.\u003c\/p\u003e\n\u003cp\u003e6. Firing Instructions\u003cbr\u003eFollow the recommended firing temperature based on your surface type:\u003c\/p\u003e\n\u003cp\u003e🔹 Enamel:\u003cbr\u003e• Kiln firing – 785°C (1445°F) for 1 minute\u003cbr\u003e• Torch firing – Heat gently until the decal changes color, then continue until it fuses with the enamel background.\u003c\/p\u003e\n\u003cp\u003e🔹 Glass:\u003cbr\u003e• Heat from 20°C (68°F) to 590°C (1094°F), then increase to 640°C (1184°F) over 4 hours.\u003cbr\u003e• Hold at this temperature for 25-30 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003e🔹 Ceramic (Overglaze Decals):\u003cbr\u003e• Heat from 20°C (68°F) to 785°C (1445°F) in 60 minutes (or as quickly as the kiln allows).\u003cbr\u003e• Hold at 785°C (1445°F) for 15 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003eAvailable Sizes\u003cbr\u003e📏 5-7\/8 x 8-1\/4 in (148 x 210 mm)\u003cbr\u003e📏 8-1\/4 x 11-3\/4 in (210 x 297 mm)\u003c\/p\u003e\n\u003cp\u003e💡 Perfect for enamel artists, glassworkers, and ceramic creators! Whether you're adding intricate details or layering multiple decals, these waterslide decals offer versatility and professional-quality results.\u003c\/p\u003e\n\u003cp\u003e📦 Fast Worldwide Shipping | 📞 Expert Support for Artists\u003c\/p\u003e\n\u003cp\u003e✨ Order your ceramic decals today and take your designs to the next level! ✨\u003c\/p\u003e","brand":"My Store","offers":[{"title":"8-1\/4 x 11-3\/4 in \/ Torch","offer_id":46079603081431,"sku":"2015","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in \/ kiln","offer_id":46079603114199,"sku":"2015","price":26.6,"currency_code":"USD","in_stock":true},{"title":"5-7\/8 x 8-1\/4 in \/ Torch","offer_id":46079603146967,"sku":"2015","price":17.5,"currency_code":"USD","in_stock":true},{"title":"5-7\/8 x 8-1\/4 in \/ kiln","offer_id":46079603179735,"sku":"2015","price":17.5,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ Torch","offer_id":49647444590807,"sku":"2015","price":29.0,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ kiln","offer_id":49647444623575,"sku":"2015","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/6568\/3415\/files\/il_fullxfull.3688793749_czz3.jpg?v=1739462309"},{"product_id":"decals-damask-ceramic-decals-enamel-decal-fusible-decal-glass-fusing-decal-waterslide-decal-10004","title":"Damask Waterslide Decal - Ceramic, Enamel \u0026 Glass Fusing Overglaze Decal Sheet 10004","description":"\u003cp\u003eWaterslide Ceramic Decals – Perfect for Enamel, Glass \u0026amp; Ceramic Overglaze\u003cbr\u003eEnhance your artistic creations with high-quality waterslide ceramic decals! These decals feature a clear background for seamless blending and are designed to adhere beautifully to enamel, glass, and ceramic surfaces.\u003c\/p\u003e\n\u003cp\u003e⚠️ Please Note: Colors may appear different after firing compared to how they look on screen.\u003c\/p\u003e\n\u003cp\u003eWHITE BACKGROUND OPTION: The white background option is for enamel only - not suitable for glass or ceramic. It's great when your piece has a dark background.\u003c\/p\u003e\n\u003cp\u003eHow to Use Waterslide Decals\u003cbr\u003e1. Preparation\u003cbr\u003e✔️ Ensure the surface is clean and dry before application.\u003cbr\u003e✔️ Cut the decal to the desired shape, leaving a small border.\u003c\/p\u003e\n\u003cp\u003e2. Soaking in Water\u003cbr\u003e✔️ Submerge the decal in lukewarm water for 30-60 seconds until it starts sliding off the backing.\u003c\/p\u003e\n\u003cp\u003e3. Application\u003cbr\u003e✔️ Place the decal on the surface while still on the backing paper.\u003cbr\u003e✔️ Gently slide the decal onto the surface using your finger or a soft tool.\u003c\/p\u003e\n\u003cp\u003e4. Smoothing \u0026amp; Positioning\u003cbr\u003e✔️ Use a soft cloth or sponge to remove air bubbles and excess water.\u003cbr\u003e✔️ Ensure the decal is smooth and properly aligned.\u003c\/p\u003e\n\u003cp\u003e5. Drying\u003cbr\u003e✔️ Let the decal dry for several hours or follow the manufacturer’s instructions.\u003cbr\u003e✔️ Ensure the surface is completely dry before firing.\u003c\/p\u003e\n\u003cp\u003e6. Firing Instructions\u003cbr\u003eFollow the recommended firing temperature based on your surface type:\u003c\/p\u003e\n\u003cp\u003e🔹 Enamel:\u003cbr\u003e• Kiln firing – 785°C (1445°F) for 1 minute\u003cbr\u003e• Torch firing – Heat gently until the decal changes color, then continue until it fuses with the enamel background.\u003c\/p\u003e\n\u003cp\u003e🔹 Glass:\u003cbr\u003e• Heat from 20°C (68°F) to 590°C (1094°F), then increase to 640°C (1184°F) over 4 hours.\u003cbr\u003e• Hold at this temperature for 25-30 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003e🔹 Ceramic (Overglaze Decals):\u003cbr\u003e• Heat from 20°C (68°F) to 785°C (1445°F) in 60 minutes (or as quickly as the kiln allows).\u003cbr\u003e• Hold at 785°C (1445°F) for 15 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003eAvailable Sizes\u003cbr\u003e📏 5-7\/8 x 8-1\/4 in (148 x 210 mm)\u003cbr\u003e📏 8-1\/4 x 11-3\/4 in (210 x 297 mm)\u003c\/p\u003e\n\u003cp\u003e💡 Perfect for enamel artists, glassworkers, and ceramic creators! Whether you're adding intricate details or layering multiple decals, these waterslide decals offer versatility and professional-quality results.\u003c\/p\u003e\n\u003cp\u003e📦 Fast Worldwide Shipping | 📞 Expert Support for Artists\u003c\/p\u003e\n\u003cp\u003e✨ Order your ceramic decals today and take your designs to the next level! ✨\u003c\/p\u003e","brand":"My Store","offers":[{"title":"8-1\/4 x 11-3\/4 in \/ Torch","offer_id":49735156629719,"sku":"10004","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in \/ kiln","offer_id":49735156662487,"sku":"10004","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ Torch","offer_id":49735158268119,"sku":"10004","price":29.0,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ kiln","offer_id":49735158300887,"sku":"10004","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/6568\/3415\/files\/10004.jpg?v=1788547414"},{"product_id":"decals-tile-ceramic-decals-enamel-decal-fusible-decal-glass-fusing-decal-waterslide-decal-10005","title":"Tile Waterslide Decal - Ceramic, Enamel \u0026 Glass Fusing Overglaze Decal Sheet 10005","description":"\u003cp\u003eWaterslide Ceramic Decals – Perfect for Enamel, Glass \u0026amp; Ceramic Overglaze\u003cbr\u003eEnhance your artistic creations with high-quality waterslide ceramic decals! These decals feature a clear background for seamless blending and are designed to adhere beautifully to enamel, glass, and ceramic surfaces.\u003c\/p\u003e\n\u003cp\u003e⚠️ Please Note: Colors may appear different after firing compared to how they look on screen.\u003c\/p\u003e\n\u003cp\u003eWHITE BACKGROUND OPTION: The white background option is for enamel only - not suitable for glass or ceramic. It's great when your piece has a dark background.\u003c\/p\u003e\n\u003cp\u003eHow to Use Waterslide Decals\u003cbr\u003e1. Preparation\u003cbr\u003e✔️ Ensure the surface is clean and dry before application.\u003cbr\u003e✔️ Cut the decal to the desired shape, leaving a small border.\u003c\/p\u003e\n\u003cp\u003e2. Soaking in Water\u003cbr\u003e✔️ Submerge the decal in lukewarm water for 30-60 seconds until it starts sliding off the backing.\u003c\/p\u003e\n\u003cp\u003e3. Application\u003cbr\u003e✔️ Place the decal on the surface while still on the backing paper.\u003cbr\u003e✔️ Gently slide the decal onto the surface using your finger or a soft tool.\u003c\/p\u003e\n\u003cp\u003e4. Smoothing \u0026amp; Positioning\u003cbr\u003e✔️ Use a soft cloth or sponge to remove air bubbles and excess water.\u003cbr\u003e✔️ Ensure the decal is smooth and properly aligned.\u003c\/p\u003e\n\u003cp\u003e5. Drying\u003cbr\u003e✔️ Let the decal dry for several hours or follow the manufacturer’s instructions.\u003cbr\u003e✔️ Ensure the surface is completely dry before firing.\u003c\/p\u003e\n\u003cp\u003e6. Firing Instructions\u003cbr\u003eFollow the recommended firing temperature based on your surface type:\u003c\/p\u003e\n\u003cp\u003e🔹 Enamel:\u003cbr\u003e• Kiln firing – 785°C (1445°F) for 1 minute\u003cbr\u003e• Torch firing – Heat gently until the decal changes color, then continue until it fuses with the enamel background.\u003c\/p\u003e\n\u003cp\u003e🔹 Glass:\u003cbr\u003e• Heat from 20°C (68°F) to 590°C (1094°F), then increase to 640°C (1184°F) over 4 hours.\u003cbr\u003e• Hold at this temperature for 25-30 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003e🔹 Ceramic (Overglaze Decals):\u003cbr\u003e• Heat from 20°C (68°F) to 785°C (1445°F) in 60 minutes (or as quickly as the kiln allows).\u003cbr\u003e• Hold at 785°C (1445°F) for 15 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003eAvailable Sizes\u003cbr\u003e📏 5-7\/8 x 8-1\/4 in (148 x 210 mm)\u003cbr\u003e📏 8-1\/4 x 11-3\/4 in (210 x 297 mm)\u003c\/p\u003e\n\u003cp\u003e💡 Perfect for enamel artists, glassworkers, and ceramic creators! Whether you're adding intricate details or layering multiple decals, these waterslide decals offer versatility and professional-quality results.\u003c\/p\u003e\n\u003cp\u003e📦 Fast Worldwide Shipping | 📞 Expert Support for Artists\u003c\/p\u003e\n\u003cp\u003e✨ Order your ceramic decals today and take your designs to the next level! ✨\u003c\/p\u003e","brand":"My Store","offers":[{"title":"8-1\/4 x 11-3\/4 in \/ Torch","offer_id":49735177240791,"sku":"10005","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in \/ kiln","offer_id":49735177273559,"sku":"10005","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ Torch","offer_id":49735178879191,"sku":"10005","price":29.0,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ kiln","offer_id":49735178911959,"sku":"10005","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/6568\/3415\/files\/10005.jpg?v=1788547543"},{"product_id":"decals-pink-french-toile-ceramic-decals-enamel-decal-fusible-decal-glass-fusing-decal-waterslide-decal-10015","title":"Pink French Toile Waterslide Decal - Ceramic, Enamel \u0026 Glass Fusing Overglaze Decal Sheet 10015","description":"\u003cp\u003eWaterslide Ceramic Decals – Perfect for Enamel, Glass \u0026amp; Ceramic Overglaze\u003cbr\u003eEnhance your artistic creations with high-quality waterslide ceramic decals! These decals feature a clear background for seamless blending and are designed to adhere beautifully to enamel, glass, and ceramic surfaces.\u003c\/p\u003e\n\u003cp\u003e⚠️ Please Note: Colors may appear different after firing compared to how they look on screen.\u003c\/p\u003e\n\u003cp\u003eWHITE BACKGROUND OPTION: The white background option is for enamel only - not suitable for glass or ceramic. It's great when your piece has a dark background.\u003c\/p\u003e\n\u003cp\u003eHow to Use Waterslide Decals\u003cbr\u003e1. Preparation\u003cbr\u003e✔️ Ensure the surface is clean and dry before application.\u003cbr\u003e✔️ Cut the decal to the desired shape, leaving a small border.\u003c\/p\u003e\n\u003cp\u003e2. Soaking in Water\u003cbr\u003e✔️ Submerge the decal in lukewarm water for 30-60 seconds until it starts sliding off the backing.\u003c\/p\u003e\n\u003cp\u003e3. Application\u003cbr\u003e✔️ Place the decal on the surface while still on the backing paper.\u003cbr\u003e✔️ Gently slide the decal onto the surface using your finger or a soft tool.\u003c\/p\u003e\n\u003cp\u003e4. Smoothing \u0026amp; Positioning\u003cbr\u003e✔️ Use a soft cloth or sponge to remove air bubbles and excess water.\u003cbr\u003e✔️ Ensure the decal is smooth and properly aligned.\u003c\/p\u003e\n\u003cp\u003e5. Drying\u003cbr\u003e✔️ Let the decal dry for several hours or follow the manufacturer’s instructions.\u003cbr\u003e✔️ Ensure the surface is completely dry before firing.\u003c\/p\u003e\n\u003cp\u003e6. Firing Instructions\u003cbr\u003eFollow the recommended firing temperature based on your surface type:\u003c\/p\u003e\n\u003cp\u003e🔹 Enamel:\u003cbr\u003e• Kiln firing – 785°C (1445°F) for 1 minute\u003cbr\u003e• Torch firing – Heat gently until the decal changes color, then continue until it fuses with the enamel background.\u003c\/p\u003e\n\u003cp\u003e🔹 Glass:\u003cbr\u003e• Heat from 20°C (68°F) to 590°C (1094°F), then increase to 640°C (1184°F) over 4 hours.\u003cbr\u003e• Hold at this temperature for 25-30 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003e🔹 Ceramic (Overglaze Decals):\u003cbr\u003e• Heat from 20°C (68°F) to 785°C (1445°F) in 60 minutes (or as quickly as the kiln allows).\u003cbr\u003e• Hold at 785°C (1445°F) for 15 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003eAvailable Sizes\u003cbr\u003e📏 5-7\/8 x 8-1\/4 in (148 x 210 mm)\u003cbr\u003e📏 8-1\/4 x 11-3\/4 in (210 x 297 mm)\u003c\/p\u003e\n\u003cp\u003e💡 Perfect for enamel artists, glassworkers, and ceramic creators! Whether you're adding intricate details or layering multiple decals, these waterslide decals offer versatility and professional-quality results.\u003c\/p\u003e\n\u003cp\u003e📦 Fast Worldwide Shipping | 📞 Expert Support for Artists\u003c\/p\u003e\n\u003cp\u003e✨ Order your ceramic decals today and take your designs to the next level! ✨\u003c\/p\u003e","brand":"My Store","offers":[{"title":"8-1\/4 x 11-3\/4 in \/ Torch","offer_id":49735295729879,"sku":"10015","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in \/ kiln","offer_id":49735295762647,"sku":"10015","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ Torch","offer_id":49735297368279,"sku":"10015","price":29.0,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ kiln","offer_id":49735297401047,"sku":"10015","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/6568\/3415\/files\/10015.jpg?v=1788548598"},{"product_id":"decals-coral-stripe-ornament-background-ceramic-decals-enamel-decal-fusible-decal-glass-fusing-decal-waterslide-decal-10022","title":"Coral Stripe Ornament Background Waterslide Decal - Ceramic, Enamel \u0026 Glass Fusing Overglaze Decal Sheet 10022","description":"\u003cp\u003eWaterslide Ceramic Decals – Perfect for Enamel, Glass \u0026amp; Ceramic Overglaze\u003cbr\u003eEnhance your artistic creations with high-quality waterslide ceramic decals! These decals feature a clear background for seamless blending and are designed to adhere beautifully to enamel, glass, and ceramic surfaces.\u003c\/p\u003e\n\u003cp\u003e⚠️ Please Note: Colors may appear different after firing compared to how they look on screen.\u003c\/p\u003e\n\u003cp\u003eWHITE BACKGROUND OPTION: The white background option is for enamel only - not suitable for glass or ceramic. It's great when your piece has a dark background.\u003c\/p\u003e\n\u003cp\u003eHow to Use Waterslide Decals\u003cbr\u003e1. Preparation\u003cbr\u003e✔️ Ensure the surface is clean and dry before application.\u003cbr\u003e✔️ Cut the decal to the desired shape, leaving a small border.\u003c\/p\u003e\n\u003cp\u003e2. Soaking in Water\u003cbr\u003e✔️ Submerge the decal in lukewarm water for 30-60 seconds until it starts sliding off the backing.\u003c\/p\u003e\n\u003cp\u003e3. Application\u003cbr\u003e✔️ Place the decal on the surface while still on the backing paper.\u003cbr\u003e✔️ Gently slide the decal onto the surface using your finger or a soft tool.\u003c\/p\u003e\n\u003cp\u003e4. Smoothing \u0026amp; Positioning\u003cbr\u003e✔️ Use a soft cloth or sponge to remove air bubbles and excess water.\u003cbr\u003e✔️ Ensure the decal is smooth and properly aligned.\u003c\/p\u003e\n\u003cp\u003e5. Drying\u003cbr\u003e✔️ Let the decal dry for several hours or follow the manufacturer’s instructions.\u003cbr\u003e✔️ Ensure the surface is completely dry before firing.\u003c\/p\u003e\n\u003cp\u003e6. Firing Instructions\u003cbr\u003eFollow the recommended firing temperature based on your surface type:\u003c\/p\u003e\n\u003cp\u003e🔹 Enamel:\u003cbr\u003e• Kiln firing – 785°C (1445°F) for 1 minute\u003cbr\u003e• Torch firing – Heat gently until the decal changes color, then continue until it fuses with the enamel background.\u003c\/p\u003e\n\u003cp\u003e🔹 Glass:\u003cbr\u003e• Heat from 20°C (68°F) to 590°C (1094°F), then increase to 640°C (1184°F) over 4 hours.\u003cbr\u003e• Hold at this temperature for 25-30 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003e🔹 Ceramic (Overglaze Decals):\u003cbr\u003e• Heat from 20°C (68°F) to 785°C (1445°F) in 60 minutes (or as quickly as the kiln allows).\u003cbr\u003e• Hold at 785°C (1445°F) for 15 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003eAvailable Sizes\u003cbr\u003e📏 5-7\/8 x 8-1\/4 in (148 x 210 mm)\u003cbr\u003e📏 8-1\/4 x 11-3\/4 in (210 x 297 mm)\u003c\/p\u003e\n\u003cp\u003e💡 Perfect for enamel artists, glassworkers, and ceramic creators! Whether you're adding intricate details or layering multiple decals, these waterslide decals offer versatility and professional-quality results.\u003c\/p\u003e\n\u003cp\u003e📦 Fast Worldwide Shipping | 📞 Expert Support for Artists\u003c\/p\u003e\n\u003cp\u003e✨ Order your ceramic decals today and take your designs to the next level! ✨\u003c\/p\u003e","brand":"My Store","offers":[{"title":"8-1\/4 x 11-3\/4 in \/ Torch","offer_id":49735329251543,"sku":"10022","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in \/ kiln","offer_id":49735329284311,"sku":"10022","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ Torch","offer_id":49735329317079,"sku":"10022","price":29.0,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ kiln","offer_id":49735329349847,"sku":"10022","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/6568\/3415\/files\/10022.jpg?v=1788548940"},{"product_id":"decals-teal-woven-stripe-background-ceramic-decals-enamel-decal-fusible-decal-glass-fusing-decal-waterslide-decal-10023","title":"Teal Woven Stripe Background Waterslide Decal - Ceramic, Enamel \u0026 Glass Fusing Overglaze Decal Sheet 10023","description":"\u003cp\u003eWaterslide Ceramic Decals – Perfect for Enamel, Glass \u0026amp; Ceramic Overglaze\u003cbr\u003eEnhance your artistic creations with high-quality waterslide ceramic decals! These decals feature a clear background for seamless blending and are designed to adhere beautifully to enamel, glass, and ceramic surfaces.\u003c\/p\u003e\n\u003cp\u003e⚠️ Please Note: Colors may appear different after firing compared to how they look on screen.\u003c\/p\u003e\n\u003cp\u003eWHITE BACKGROUND OPTION: The white background option is for enamel only - not suitable for glass or ceramic. It's great when your piece has a dark background.\u003c\/p\u003e\n\u003cp\u003eHow to Use Waterslide Decals\u003cbr\u003e1. Preparation\u003cbr\u003e✔️ Ensure the surface is clean and dry before application.\u003cbr\u003e✔️ Cut the decal to the desired shape, leaving a small border.\u003c\/p\u003e\n\u003cp\u003e2. Soaking in Water\u003cbr\u003e✔️ Submerge the decal in lukewarm water for 30-60 seconds until it starts sliding off the backing.\u003c\/p\u003e\n\u003cp\u003e3. Application\u003cbr\u003e✔️ Place the decal on the surface while still on the backing paper.\u003cbr\u003e✔️ Gently slide the decal onto the surface using your finger or a soft tool.\u003c\/p\u003e\n\u003cp\u003e4. Smoothing \u0026amp; Positioning\u003cbr\u003e✔️ Use a soft cloth or sponge to remove air bubbles and excess water.\u003cbr\u003e✔️ Ensure the decal is smooth and properly aligned.\u003c\/p\u003e\n\u003cp\u003e5. Drying\u003cbr\u003e✔️ Let the decal dry for several hours or follow the manufacturer’s instructions.\u003cbr\u003e✔️ Ensure the surface is completely dry before firing.\u003c\/p\u003e\n\u003cp\u003e6. Firing Instructions\u003cbr\u003eFollow the recommended firing temperature based on your surface type:\u003c\/p\u003e\n\u003cp\u003e🔹 Enamel:\u003cbr\u003e• Kiln firing – 785°C (1445°F) for 1 minute\u003cbr\u003e• Torch firing – Heat gently until the decal changes color, then continue until it fuses with the enamel background.\u003c\/p\u003e\n\u003cp\u003e🔹 Glass:\u003cbr\u003e• Heat from 20°C (68°F) to 590°C (1094°F), then increase to 640°C (1184°F) over 4 hours.\u003cbr\u003e• Hold at this temperature for 25-30 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003e🔹 Ceramic (Overglaze Decals):\u003cbr\u003e• Heat from 20°C (68°F) to 785°C (1445°F) in 60 minutes (or as quickly as the kiln allows).\u003cbr\u003e• Hold at 785°C (1445°F) for 15 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003eAvailable Sizes\u003cbr\u003e📏 5-7\/8 x 8-1\/4 in (148 x 210 mm)\u003cbr\u003e📏 8-1\/4 x 11-3\/4 in (210 x 297 mm)\u003c\/p\u003e\n\u003cp\u003e💡 Perfect for enamel artists, glassworkers, and ceramic creators! Whether you're adding intricate details or layering multiple decals, these waterslide decals offer versatility and professional-quality results.\u003c\/p\u003e\n\u003cp\u003e📦 Fast Worldwide Shipping | 📞 Expert Support for Artists\u003c\/p\u003e\n\u003cp\u003e✨ Order your ceramic decals today and take your designs to the next level! ✨\u003c\/p\u003e","brand":"My Store","offers":[{"title":"8-1\/4 x 11-3\/4 in \/ Torch","offer_id":49735331184855,"sku":"10023","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in \/ kiln","offer_id":49735331217623,"sku":"10023","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ Torch","offer_id":49735331250391,"sku":"10023","price":29.0,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ kiln","offer_id":49735331283159,"sku":"10023","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/6568\/3415\/files\/10023.jpg?v=1788548954"},{"product_id":"decals-teal-tile-ceramic-decals-enamel-decal-fusible-decal-glass-fusing-decal-waterslide-decal-10035","title":"Teal Tile Waterslide Decal - Ceramic, Enamel \u0026 Glass Fusing Overglaze Decal Sheet 10035","description":"\u003cp\u003eWaterslide Ceramic Decals – Perfect for Enamel, Glass \u0026amp; Ceramic Overglaze\u003cbr\u003eEnhance your artistic creations with high-quality waterslide ceramic decals! These decals feature a clear background for seamless blending and are designed to adhere beautifully to enamel, glass, and ceramic surfaces.\u003c\/p\u003e\n\u003cp\u003e⚠️ Please Note: Colors may appear different after firing compared to how they look on screen.\u003c\/p\u003e\n\u003cp\u003eWHITE BACKGROUND OPTION: The white background option is for enamel only - not suitable for glass or ceramic. It's great when your piece has a dark background.\u003c\/p\u003e\n\u003cp\u003eHow to Use Waterslide Decals\u003cbr\u003e1. Preparation\u003cbr\u003e✔️ Ensure the surface is clean and dry before application.\u003cbr\u003e✔️ Cut the decal to the desired shape, leaving a small border.\u003c\/p\u003e\n\u003cp\u003e2. Soaking in Water\u003cbr\u003e✔️ Submerge the decal in lukewarm water for 30-60 seconds until it starts sliding off the backing.\u003c\/p\u003e\n\u003cp\u003e3. Application\u003cbr\u003e✔️ Place the decal on the surface while still on the backing paper.\u003cbr\u003e✔️ Gently slide the decal onto the surface using your finger or a soft tool.\u003c\/p\u003e\n\u003cp\u003e4. Smoothing \u0026amp; Positioning\u003cbr\u003e✔️ Use a soft cloth or sponge to remove air bubbles and excess water.\u003cbr\u003e✔️ Ensure the decal is smooth and properly aligned.\u003c\/p\u003e\n\u003cp\u003e5. Drying\u003cbr\u003e✔️ Let the decal dry for several hours or follow the manufacturer’s instructions.\u003cbr\u003e✔️ Ensure the surface is completely dry before firing.\u003c\/p\u003e\n\u003cp\u003e6. Firing Instructions\u003cbr\u003eFollow the recommended firing temperature based on your surface type:\u003c\/p\u003e\n\u003cp\u003e🔹 Enamel:\u003cbr\u003e• Kiln firing – 785°C (1445°F) for 1 minute\u003cbr\u003e• Torch firing – Heat gently until the decal changes color, then continue until it fuses with the enamel background.\u003c\/p\u003e\n\u003cp\u003e🔹 Glass:\u003cbr\u003e• Heat from 20°C (68°F) to 590°C (1094°F), then increase to 640°C (1184°F) over 4 hours.\u003cbr\u003e• Hold at this temperature for 25-30 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003e🔹 Ceramic (Overglaze Decals):\u003cbr\u003e• Heat from 20°C (68°F) to 785°C (1445°F) in 60 minutes (or as quickly as the kiln allows).\u003cbr\u003e• Hold at 785°C (1445°F) for 15 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003eAvailable Sizes\u003cbr\u003e📏 5-7\/8 x 8-1\/4 in (148 x 210 mm)\u003cbr\u003e📏 8-1\/4 x 11-3\/4 in (210 x 297 mm)\u003c\/p\u003e\n\u003cp\u003e💡 Perfect for enamel artists, glassworkers, and ceramic creators! Whether you're adding intricate details or layering multiple decals, these waterslide decals offer versatility and professional-quality results.\u003c\/p\u003e\n\u003cp\u003e📦 Fast Worldwide Shipping | 📞 Expert Support for Artists\u003c\/p\u003e\n\u003cp\u003e✨ Order your ceramic decals today and take your designs to the next level! ✨\u003c\/p\u003e","brand":"My Store","offers":[{"title":"8-1\/4 x 11-3\/4 in \/ Torch","offer_id":49741147930839,"sku":"10035","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in \/ kiln","offer_id":49741147963607,"sku":"10035","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ Torch","offer_id":49741148651735,"sku":"10035","price":29.0,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ kiln","offer_id":49741148684503,"sku":"10035","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/6568\/3415\/files\/10035.jpg?v=1788625151"},{"product_id":"decals-french-blue-toile-ceramic-decals-enamel-decal-fusible-decal-glass-fusing-decal-waterslide-decal-10037","title":"French Blue Toile Waterslide Decal - Ceramic, Enamel \u0026 Glass Fusing Overglaze Decal Sheet 10037","description":"\u003cp\u003eWaterslide Ceramic Decals – Perfect for Enamel, Glass \u0026amp; Ceramic Overglaze\u003cbr\u003eEnhance your artistic creations with high-quality waterslide ceramic decals! These decals feature a clear background for seamless blending and are designed to adhere beautifully to enamel, glass, and ceramic surfaces.\u003c\/p\u003e\n\u003cp\u003e⚠️ Please Note: Colors may appear different after firing compared to how they look on screen.\u003c\/p\u003e\n\u003cp\u003eWHITE BACKGROUND OPTION: The white background option is for enamel only - not suitable for glass or ceramic. It's great when your piece has a dark background.\u003c\/p\u003e\n\u003cp\u003eHow to Use Waterslide Decals\u003cbr\u003e1. Preparation\u003cbr\u003e✔️ Ensure the surface is clean and dry before application.\u003cbr\u003e✔️ Cut the decal to the desired shape, leaving a small border.\u003c\/p\u003e\n\u003cp\u003e2. Soaking in Water\u003cbr\u003e✔️ Submerge the decal in lukewarm water for 30-60 seconds until it starts sliding off the backing.\u003c\/p\u003e\n\u003cp\u003e3. Application\u003cbr\u003e✔️ Place the decal on the surface while still on the backing paper.\u003cbr\u003e✔️ Gently slide the decal onto the surface using your finger or a soft tool.\u003c\/p\u003e\n\u003cp\u003e4. Smoothing \u0026amp; Positioning\u003cbr\u003e✔️ Use a soft cloth or sponge to remove air bubbles and excess water.\u003cbr\u003e✔️ Ensure the decal is smooth and properly aligned.\u003c\/p\u003e\n\u003cp\u003e5. Drying\u003cbr\u003e✔️ Let the decal dry for several hours or follow the manufacturer’s instructions.\u003cbr\u003e✔️ Ensure the surface is completely dry before firing.\u003c\/p\u003e\n\u003cp\u003e6. Firing Instructions\u003cbr\u003eFollow the recommended firing temperature based on your surface type:\u003c\/p\u003e\n\u003cp\u003e🔹 Enamel:\u003cbr\u003e• Kiln firing – 785°C (1445°F) for 1 minute\u003cbr\u003e• Torch firing – Heat gently until the decal changes color, then continue until it fuses with the enamel background.\u003c\/p\u003e\n\u003cp\u003e🔹 Glass:\u003cbr\u003e• Heat from 20°C (68°F) to 590°C (1094°F), then increase to 640°C (1184°F) over 4 hours.\u003cbr\u003e• Hold at this temperature for 25-30 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003e🔹 Ceramic (Overglaze Decals):\u003cbr\u003e• Heat from 20°C (68°F) to 785°C (1445°F) in 60 minutes (or as quickly as the kiln allows).\u003cbr\u003e• Hold at 785°C (1445°F) for 15 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003eAvailable Sizes\u003cbr\u003e📏 5-7\/8 x 8-1\/4 in (148 x 210 mm)\u003cbr\u003e📏 8-1\/4 x 11-3\/4 in (210 x 297 mm)\u003c\/p\u003e\n\u003cp\u003e💡 Perfect for enamel artists, glassworkers, and ceramic creators! Whether you're adding intricate details or layering multiple decals, these waterslide decals offer versatility and professional-quality results.\u003c\/p\u003e\n\u003cp\u003e📦 Fast Worldwide Shipping | 📞 Expert Support for Artists\u003c\/p\u003e\n\u003cp\u003e✨ Order your ceramic decals today and take your designs to the next level! ✨\u003c\/p\u003e","brand":"My Store","offers":[{"title":"8-1\/4 x 11-3\/4 in \/ Torch","offer_id":49741157761239,"sku":"10037","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in \/ kiln","offer_id":49741157794007,"sku":"10037","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ Torch","offer_id":49741158482135,"sku":"10037","price":29.0,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ kiln","offer_id":49741158514903,"sku":"10037","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/6568\/3415\/files\/10037.jpg?v=1788625274"},{"product_id":"decals-retro-pin-up-ceramic-decals-enamel-decal-fusible-decal-glass-fusing-decal-waterslide-decal-10046","title":"Retro Pin Up Waterslide Decal - Ceramic, Enamel \u0026 Glass Fusing Overglaze Decal Sheet 10046","description":"\u003cp\u003eWaterslide Ceramic Decals – Perfect for Enamel, Glass \u0026amp; Ceramic Overglaze\u003cbr\u003eEnhance your artistic creations with high-quality waterslide ceramic decals! These decals feature a clear background for seamless blending and are designed to adhere beautifully to enamel, glass, and ceramic surfaces.\u003c\/p\u003e\n\u003cp\u003e⚠️ Please Note: Colors may appear different after firing compared to how they look on screen.\u003c\/p\u003e\n\u003cp\u003eWHITE BACKGROUND OPTION: The white background option is for enamel only - not suitable for glass or ceramic. It's great when your piece has a dark background.\u003c\/p\u003e\n\u003cp\u003eHow to Use Waterslide Decals\u003cbr\u003e1. Preparation\u003cbr\u003e✔️ Ensure the surface is clean and dry before application.\u003cbr\u003e✔️ Cut the decal to the desired shape, leaving a small border.\u003c\/p\u003e\n\u003cp\u003e2. Soaking in Water\u003cbr\u003e✔️ Submerge the decal in lukewarm water for 30-60 seconds until it starts sliding off the backing.\u003c\/p\u003e\n\u003cp\u003e3. Application\u003cbr\u003e✔️ Place the decal on the surface while still on the backing paper.\u003cbr\u003e✔️ Gently slide the decal onto the surface using your finger or a soft tool.\u003c\/p\u003e\n\u003cp\u003e4. Smoothing \u0026amp; Positioning\u003cbr\u003e✔️ Use a soft cloth or sponge to remove air bubbles and excess water.\u003cbr\u003e✔️ Ensure the decal is smooth and properly aligned.\u003c\/p\u003e\n\u003cp\u003e5. Drying\u003cbr\u003e✔️ Let the decal dry for several hours or follow the manufacturer’s instructions.\u003cbr\u003e✔️ Ensure the surface is completely dry before firing.\u003c\/p\u003e\n\u003cp\u003e6. Firing Instructions\u003cbr\u003eFollow the recommended firing temperature based on your surface type:\u003c\/p\u003e\n\u003cp\u003e🔹 Enamel:\u003cbr\u003e• Kiln firing – 785°C (1445°F) for 1 minute\u003cbr\u003e• Torch firing – Heat gently until the decal changes color, then continue until it fuses with the enamel background.\u003c\/p\u003e\n\u003cp\u003e🔹 Glass:\u003cbr\u003e• Heat from 20°C (68°F) to 590°C (1094°F), then increase to 640°C (1184°F) over 4 hours.\u003cbr\u003e• Hold at this temperature for 25-30 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003e🔹 Ceramic (Overglaze Decals):\u003cbr\u003e• Heat from 20°C (68°F) to 785°C (1445°F) in 60 minutes (or as quickly as the kiln allows).\u003cbr\u003e• Hold at 785°C (1445°F) for 15 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003eAvailable Sizes\u003cbr\u003e📏 5-7\/8 x 8-1\/4 in (148 x 210 mm)\u003cbr\u003e📏 8-1\/4 x 11-3\/4 in (210 x 297 mm)\u003c\/p\u003e\n\u003cp\u003e💡 Perfect for enamel artists, glassworkers, and ceramic creators! Whether you're adding intricate details or layering multiple decals, these waterslide decals offer versatility and professional-quality results.\u003c\/p\u003e\n\u003cp\u003e📦 Fast Worldwide Shipping | 📞 Expert Support for Artists\u003c\/p\u003e\n\u003cp\u003e✨ Order your ceramic decals today and take your designs to the next level! ✨\u003c\/p\u003e","brand":"My Store","offers":[{"title":"8-1\/4 x 11-3\/4 in \/ Torch","offer_id":49741191577815,"sku":"10046","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in \/ kiln","offer_id":49741191610583,"sku":"10046","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ Torch","offer_id":49741192298711,"sku":"10046","price":29.0,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ kiln","offer_id":49741192331479,"sku":"10046","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/6568\/3415\/files\/10046.jpg?v=1788625812"},{"product_id":"decals-teal-tile-two-ceramic-decals-enamel-decal-fusible-decal-glass-fusing-decal-waterslide-decal-10050","title":"Teal Tile Two Waterslide Decal - Ceramic, Enamel \u0026 Glass Fusing Overglaze Decal Sheet 10050","description":"\u003cp\u003eWaterslide Ceramic Decals – Perfect for Enamel, Glass \u0026amp; Ceramic Overglaze\u003cbr\u003eEnhance your artistic creations with high-quality waterslide ceramic decals! These decals feature a clear background for seamless blending and are designed to adhere beautifully to enamel, glass, and ceramic surfaces.\u003c\/p\u003e\n\u003cp\u003e⚠️ Please Note: Colors may appear different after firing compared to how they look on screen.\u003c\/p\u003e\n\u003cp\u003eWHITE BACKGROUND OPTION: The white background option is for enamel only - not suitable for glass or ceramic. It's great when your piece has a dark background.\u003c\/p\u003e\n\u003cp\u003eHow to Use Waterslide Decals\u003cbr\u003e1. Preparation\u003cbr\u003e✔️ Ensure the surface is clean and dry before application.\u003cbr\u003e✔️ Cut the decal to the desired shape, leaving a small border.\u003c\/p\u003e\n\u003cp\u003e2. Soaking in Water\u003cbr\u003e✔️ Submerge the decal in lukewarm water for 30-60 seconds until it starts sliding off the backing.\u003c\/p\u003e\n\u003cp\u003e3. Application\u003cbr\u003e✔️ Place the decal on the surface while still on the backing paper.\u003cbr\u003e✔️ Gently slide the decal onto the surface using your finger or a soft tool.\u003c\/p\u003e\n\u003cp\u003e4. Smoothing \u0026amp; Positioning\u003cbr\u003e✔️ Use a soft cloth or sponge to remove air bubbles and excess water.\u003cbr\u003e✔️ Ensure the decal is smooth and properly aligned.\u003c\/p\u003e\n\u003cp\u003e5. Drying\u003cbr\u003e✔️ Let the decal dry for several hours or follow the manufacturer’s instructions.\u003cbr\u003e✔️ Ensure the surface is completely dry before firing.\u003c\/p\u003e\n\u003cp\u003e6. Firing Instructions\u003cbr\u003eFollow the recommended firing temperature based on your surface type:\u003c\/p\u003e\n\u003cp\u003e🔹 Enamel:\u003cbr\u003e• Kiln firing – 785°C (1445°F) for 1 minute\u003cbr\u003e• Torch firing – Heat gently until the decal changes color, then continue until it fuses with the enamel background.\u003c\/p\u003e\n\u003cp\u003e🔹 Glass:\u003cbr\u003e• Heat from 20°C (68°F) to 590°C (1094°F), then increase to 640°C (1184°F) over 4 hours.\u003cbr\u003e• Hold at this temperature for 25-30 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003e🔹 Ceramic (Overglaze Decals):\u003cbr\u003e• Heat from 20°C (68°F) to 785°C (1445°F) in 60 minutes (or as quickly as the kiln allows).\u003cbr\u003e• Hold at 785°C (1445°F) for 15 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003eAvailable Sizes\u003cbr\u003e📏 5-7\/8 x 8-1\/4 in (148 x 210 mm)\u003cbr\u003e📏 8-1\/4 x 11-3\/4 in (210 x 297 mm)\u003c\/p\u003e\n\u003cp\u003e💡 Perfect for enamel artists, glassworkers, and ceramic creators! Whether you're adding intricate details or layering multiple decals, these waterslide decals offer versatility and professional-quality results.\u003c\/p\u003e\n\u003cp\u003e📦 Fast Worldwide Shipping | 📞 Expert Support for Artists\u003c\/p\u003e\n\u003cp\u003e✨ Order your ceramic decals today and take your designs to the next level! ✨\u003c\/p\u003e","brand":"My Store","offers":[{"title":"8-1\/4 x 11-3\/4 in \/ Torch","offer_id":49741201670359,"sku":"10050","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in \/ kiln","offer_id":49741201703127,"sku":"10050","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ Torch","offer_id":49741202129111,"sku":"10050","price":29.0,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ kiln","offer_id":49741202161879,"sku":"10050","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/6568\/3415\/files\/10050.jpg?v=1788626036"},{"product_id":"decals-teal-tile-tableware-ceramic-decals-enamel-decal-fusible-decal-glass-fusing-decal-waterslide-decal-10065","title":"Teal Tile Tableware Waterslide Decal - Ceramic, Enamel \u0026 Glass Fusing Overglaze Decal Sheet 10065","description":"\u003cp\u003eWaterslide Ceramic Decals – Perfect for Enamel, Glass \u0026amp; Ceramic Overglaze\u003cbr\u003eEnhance your artistic creations with high-quality waterslide ceramic decals! These decals feature a clear background for seamless blending and are designed to adhere beautifully to enamel, glass, and ceramic surfaces.\u003c\/p\u003e\n\u003cp\u003e⚠️ Please Note: Colors may appear different after firing compared to how they look on screen.\u003c\/p\u003e\n\u003cp\u003eWHITE BACKGROUND OPTION: The white background option is for enamel only - not suitable for glass or ceramic. It's great when your piece has a dark background.\u003c\/p\u003e\n\u003cp\u003eHow to Use Waterslide Decals\u003cbr\u003e1. Preparation\u003cbr\u003e✔️ Ensure the surface is clean and dry before application.\u003cbr\u003e✔️ Cut the decal to the desired shape, leaving a small border.\u003c\/p\u003e\n\u003cp\u003e2. Soaking in Water\u003cbr\u003e✔️ Submerge the decal in lukewarm water for 30-60 seconds until it starts sliding off the backing.\u003c\/p\u003e\n\u003cp\u003e3. Application\u003cbr\u003e✔️ Place the decal on the surface while still on the backing paper.\u003cbr\u003e✔️ Gently slide the decal onto the surface using your finger or a soft tool.\u003c\/p\u003e\n\u003cp\u003e4. Smoothing \u0026amp; Positioning\u003cbr\u003e✔️ Use a soft cloth or sponge to remove air bubbles and excess water.\u003cbr\u003e✔️ Ensure the decal is smooth and properly aligned.\u003c\/p\u003e\n\u003cp\u003e5. Drying\u003cbr\u003e✔️ Let the decal dry for several hours or follow the manufacturer’s instructions.\u003cbr\u003e✔️ Ensure the surface is completely dry before firing.\u003c\/p\u003e\n\u003cp\u003e6. Firing Instructions\u003cbr\u003eFollow the recommended firing temperature based on your surface type:\u003c\/p\u003e\n\u003cp\u003e🔹 Enamel:\u003cbr\u003e• Kiln firing – 785°C (1445°F) for 1 minute\u003cbr\u003e• Torch firing – Heat gently until the decal changes color, then continue until it fuses with the enamel background.\u003c\/p\u003e\n\u003cp\u003e🔹 Glass:\u003cbr\u003e• Heat from 20°C (68°F) to 590°C (1094°F), then increase to 640°C (1184°F) over 4 hours.\u003cbr\u003e• Hold at this temperature for 25-30 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003e🔹 Ceramic (Overglaze Decals):\u003cbr\u003e• Heat from 20°C (68°F) to 785°C (1445°F) in 60 minutes (or as quickly as the kiln allows).\u003cbr\u003e• Hold at 785°C (1445°F) for 15 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003eAvailable Sizes\u003cbr\u003e📏 5-7\/8 x 8-1\/4 in (148 x 210 mm)\u003cbr\u003e📏 8-1\/4 x 11-3\/4 in (210 x 297 mm)\u003c\/p\u003e\n\u003cp\u003e💡 Perfect for enamel artists, glassworkers, and ceramic creators! Whether you're adding intricate details or layering multiple decals, these waterslide decals offer versatility and professional-quality results.\u003c\/p\u003e\n\u003cp\u003e📦 Fast Worldwide Shipping | 📞 Expert Support for Artists\u003c\/p\u003e\n\u003cp\u003e✨ Order your ceramic decals today and take your designs to the next level! ✨\u003c\/p\u003e","brand":"My Store","offers":[{"title":"8-1\/4 x 11-3\/4 in \/ Torch","offer_id":67593654141143,"sku":"10065","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in \/ kiln","offer_id":67593654173911,"sku":"10065","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ Torch","offer_id":67593654206679,"sku":"10065","price":29.0,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ kiln","offer_id":67593654239447,"sku":"10065","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/6568\/3415\/files\/10065.jpg?v=1790670628"},{"product_id":"decals-dusty-blue-tableware-ceramic-decals-enamel-decal-fusible-decal-glass-fusing-decal-waterslide-decal-10066","title":"Dusty Blue Tableware Waterslide Decal - Ceramic, Enamel \u0026 Glass Fusing Overglaze Decal Sheet 10066","description":"\u003cp\u003eWaterslide Ceramic Decals – Perfect for Enamel, Glass \u0026amp; Ceramic Overglaze\u003cbr\u003eEnhance your artistic creations with high-quality waterslide ceramic decals! These decals feature a clear background for seamless blending and are designed to adhere beautifully to enamel, glass, and ceramic surfaces.\u003c\/p\u003e\n\u003cp\u003e⚠️ Please Note: Colors may appear different after firing compared to how they look on screen.\u003c\/p\u003e\n\u003cp\u003eWHITE BACKGROUND OPTION: The white background option is for enamel only - not suitable for glass or ceramic. It's great when your piece has a dark background.\u003c\/p\u003e\n\u003cp\u003eHow to Use Waterslide Decals\u003cbr\u003e1. Preparation\u003cbr\u003e✔️ Ensure the surface is clean and dry before application.\u003cbr\u003e✔️ Cut the decal to the desired shape, leaving a small border.\u003c\/p\u003e\n\u003cp\u003e2. Soaking in Water\u003cbr\u003e✔️ Submerge the decal in lukewarm water for 30-60 seconds until it starts sliding off the backing.\u003c\/p\u003e\n\u003cp\u003e3. Application\u003cbr\u003e✔️ Place the decal on the surface while still on the backing paper.\u003cbr\u003e✔️ Gently slide the decal onto the surface using your finger or a soft tool.\u003c\/p\u003e\n\u003cp\u003e4. Smoothing \u0026amp; Positioning\u003cbr\u003e✔️ Use a soft cloth or sponge to remove air bubbles and excess water.\u003cbr\u003e✔️ Ensure the decal is smooth and properly aligned.\u003c\/p\u003e\n\u003cp\u003e5. Drying\u003cbr\u003e✔️ Let the decal dry for several hours or follow the manufacturer’s instructions.\u003cbr\u003e✔️ Ensure the surface is completely dry before firing.\u003c\/p\u003e\n\u003cp\u003e6. Firing Instructions\u003cbr\u003eFollow the recommended firing temperature based on your surface type:\u003c\/p\u003e\n\u003cp\u003e🔹 Enamel:\u003cbr\u003e• Kiln firing – 785°C (1445°F) for 1 minute\u003cbr\u003e• Torch firing – Heat gently until the decal changes color, then continue until it fuses with the enamel background.\u003c\/p\u003e\n\u003cp\u003e🔹 Glass:\u003cbr\u003e• Heat from 20°C (68°F) to 590°C (1094°F), then increase to 640°C (1184°F) over 4 hours.\u003cbr\u003e• Hold at this temperature for 25-30 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003e🔹 Ceramic (Overglaze Decals):\u003cbr\u003e• Heat from 20°C (68°F) to 785°C (1445°F) in 60 minutes (or as quickly as the kiln allows).\u003cbr\u003e• Hold at 785°C (1445°F) for 15 minutes, then cool down.\u003c\/p\u003e\n\u003cp\u003eAvailable Sizes\u003cbr\u003e📏 5-7\/8 x 8-1\/4 in (148 x 210 mm)\u003cbr\u003e📏 8-1\/4 x 11-3\/4 in (210 x 297 mm)\u003c\/p\u003e\n\u003cp\u003e💡 Perfect for enamel artists, glassworkers, and ceramic creators! Whether you're adding intricate details or layering multiple decals, these waterslide decals offer versatility and professional-quality results.\u003c\/p\u003e\n\u003cp\u003e📦 Fast Worldwide Shipping | 📞 Expert Support for Artists\u003c\/p\u003e\n\u003cp\u003e✨ Order your ceramic decals today and take your designs to the next level! ✨\u003c\/p\u003e","brand":"My Store","offers":[{"title":"8-1\/4 x 11-3\/4 in \/ Torch","offer_id":67593654272215,"sku":"10066","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in \/ kiln","offer_id":67593654304983,"sku":"10066","price":26.6,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ Torch","offer_id":67593654337751,"sku":"10066","price":29.0,"currency_code":"USD","in_stock":true},{"title":"8-1\/4 x 11-3\/4 in WB \/ kiln","offer_id":67593654370519,"sku":"10066","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/6568\/3415\/files\/10066.jpg?v=1790670642"}],"url":"https:\/\/pearlysupply.com\/collections\/decals-patterns-and-texture.oembed","provider":"Pearly's Supply","version":"1.0","type":"link"}